Keep up to date with

Special Gift Offer
URL:
http://www.gardengatemagazine.com/articles/projects/all/garden-edging-with-upcycled-hoses/
Share:

Garden Edging with Upcycled Hoses

By: Carrie Topp, James A. Baggett
Don’t throw out those worn-out garden hoses! Give them new life when you upcycle them into unique garden edging. Check out our helpful tips to create your own.

DIY garden edging

Like everything else in the world, garden hoses have a limited life. While your first thought may be to haul your old garden hose out to the dumpster, you may want to hang on to it. Using upcycled garden hoses and cable ties, you can transform all those old garden hoses into a great-looking edging that will last for years. Before you begin the project, allow the hose to lie in the sun to soften for several hours to make it easier to work with. Our garden edging features both standard rubber hoses and soaker hoses for a color-coordinated look. But you can opt for a solid color theme or create a patchwork effect with a variety of different colored hoses. Let your hoses be your guide. Watch our video above to see how it all comes together!

Materials

  • 20 ft. of 1-in. thin-wall conduit pipe (2 10-ft. lengths)
  • Fiberglass garden stakes (4 4-ft. lengths)
  • Worn garden or soaker hoses
  • 8-in. black cable ties, 60 total

Tools

Cutting list

  • (10) 24-in.-long thin-wall conduit pipe
  • (14) 12-in.-long fiberglass garden stakes

garden hose edging construction diagram: This 10-row pattern measures 10 inches tall and 8 feet long. Customize yours with more or fewer garden hoses.

Garden hose edging construction diagram

  • On each end, a pair of cable ties secures each row of garden hose to the conduit pipe
  • Leave the top 2 inches free so garden hose won’t slip off the conduit pipe
  • The 12-inch long fiberglass stakes (purple) are inserted into the ground 1 inch, just enough to keep them upright
  • Criss-cross a pair of cable ties around a few conduit pipes for a decorative touch

cutting conduit and fiberglass stakes: Clamp conduit pipe and fiberglass stakes to a miter box while cutting them with a hacksaw.

Step 1: Cut conduit pipe and fiberglass stakes

Cut conduit and fiberglass stakes to the lengths shown in the materials/tools list above using a hacksaw and miter box. Hold them in place with clamps for cutting, and if needed, file edges of the conduit pipe to smooth any sharp edges.

You Might Also Like:
How to Build a Raised Garden Bed
DIY Potting Bench
Wood-Working Garden Projects
Create Your Own Spiral Topiary


cutting garden hose with pruners: Pruners work well for cutting garden hose.

Step 2: Cut garden hose

Using garden pruners, cut 10 lengths of garden hose 108 inches long. This 10-row pattern measures 10 inches tall and 8 feet long, but you can customize yours with more or fewer garden hoses.


securing garden hose end with cable ties: A small clamp helps flatten the garden hose around each end conduit pipe while attaching cable ties.

Step 3: Secure ends of garden hose

Use a mallet to pound the first conduit pipe into the ground so 12 inches remain above ground. This height will be the same for all other conduit pipe. (Note: A rubber mallet keeps the top edge of the conduit uncurled while a hammer will roll the edge.) Working from bottom to top, begin securing each garden hose with a pair of cable ties. We used an overlap of 6 inches of hose at each end. Flatten the end of each garden hose around the conduit before securing the cable tie. A small clamp helps flatten the garden hose tight and keeps it snug. Once all rows are secure at one end, lay them out and repeat this step at the other end of the edging. This design curves, which means you’ll need to eyeball it as you go and leave slightly more slack in the line than if it were taut and straight.

You Might Also Like:
DIY Privacy Screen
Upcycled Garden Design Ideas
DIY Garden Chandelier
Make Your Own Rain Barrel


shape edging secure by pounding pipe: Once both ends are set you can begin weaving the additional conduit pipes through the hoses and pounding them in place.

Step 4: Pound conduit pipe into ground

Begin weaving by threading the remaining conduit through the alternating hoses. Partially pound each pipe into the ground a few inches to secure it and to establish the spacing. Once you’ve established the edging’s shape, pound in the pipes until about a foot remains above ground. This will leave the top couple of inches free of garden hose to prevent it from slipping off.

Project tip

Placing a scrap piece of wood on top of the pipe and hitting it will give you a larger surface to strike and help prevent the pipe edge from curling.


add details with solar lights and criss-cross cable ties : Place outdoor solar lights (on stakes) into alternating conduit pipes to add a decorative element and 
to illuminate pathways.

Step 5: Weave stakes and add details

Repeat the process by weaving two fiberglass stakes between each pair of pipes. Push the stakes into the ground no more than an inch deep, which is just enough to keep them upright. Add personal touches like solar path lights or criss-cross the cable ties like you see in the photo above right for added visual interest.

Published: June 17, 2020
Share:

Product Recommendations

Here are some supplies and tools we find essential in our everyday work in the garden. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Related Tags

budget friendly diy project

Related Articles


You Might Also Like…

| Projects

DIY Potting Bench

Tired of making a mess when potting plants? Watch our how-to video to see how we upcycled an old drop leaf table into this handy DIY potting bench!
| Projects

DIY terra-cotta bird feeder

Learn how to make a simple but stylish DIY terra-cotta bird feeder using an orchid pot. It will look great in your garden and the birds will love it, too!