Maintaining your garden or the lawn is not a piece of cake. It requires effort, hard work, proper knowledge, and a collection of correct equipment. For example, removing the infected leaves, buds, or stems isn't the ultimate solution for keeping the shrubs healthy. You also have to remove the overgrown or dead parts before the new flower buds can bloom. On a similar note, using insecticides or any other pesticide might keep the nuisance organisms away, but it will harm your plants too. So, you should adopt an innovative approach like using protective covers like a shrub guard for keeping your garden healthy. These protectors are available in various forms, sizes, and shapes to protect your plants from not only animals and pests but also changing weather conditions. So, invest in one of the finest shrub guards in 2022 to protect the plants you have grown with the utmost care from damage.
Shrub guards are extremely beneficial in protecting the plants and keeping them healthy throughout the winter season. They prevent frostbites or hail from damaging the bark and stems and insulate the entire plant to keep them warm. Therefore, having the best protector is not just a necessity.
But there are different shrub guards of different sizes, protection abilities, and more, making choosing the perfect one a tough task. So, it would help if you considered the below-mentioned factors to get your hands on the best shrub protector.
What Are the Various Types of Shrub Guards Available in the Market?
A blanket roll is a kind of shrub guard that needs to be wrapped around the thick bark of the trees and shrubs. You have to start from the base after fixing the roll with the bark’s body and then spiral upward until you reach the marked position.
Netted shrub guards are made from fiber strands and can protect the plants from insect infestation and other factors. Besides, they allow proper air circulation and give the required exposure to sunlight for the survival of plants.
Another category of shrub guards, known as jackets, comes with a zipper. You need to open the zipper, wrap the jacket around the plant, and then close it for a proper fit.
What Are the Benefits of Using a Shrub Guard for Your Garden Plants?
A shrub guard can protect the plants from air and ground frost, high-velocity winds, uprooting, cold water, and extremely cold winters.
Sometimes, they can do wonders by preventing the loss of nutrition from the areas where you have performed transplantation.
With the shrub protective guard, it will become much easier for you to protect the bark and stems from intense sunlight.
One of the main uses of a shrub protector is to keep pests, insects, and other animals away from the fruits, flowers, and vegetables.
What Major Factors Should You Consider Before Purchasing a Shrub Guard?
Before you proceed with anything, you need to decide the appropriate size of the shrub guards. Since they are available in three different types, their dimensions vary significantly. For example, when you want to have the blanket rolls, you must consider their length (in feet) and width (in inches). This will help you understand whether a single roll will cover multiple plants or not. Similarly, to choose a proper net cover or a wrapping guard, you should check the height of the plants and their width.
You can use some protective guards for multiple plant types like ornamental trees, fruit-bearing trees, garden plants, etc. In contrast, others are compatible only with shrubs and bushes but not tall trees. It is very important to cross-check whether the chosen shrub guard will protect your plants or not.
You also have to consider the material while looking for the best shrub guard. If you want to protect the trees from heavy rain, cold water, and extreme winter conditions, go for non-woven, thick fabric wraps. They can offer a high amount of insulation to keep the plants warm and save them from the harshness of the weather. Similarly, if you live in an area where the wind blows at high velocity in the winter season, it would be best to purchase guards made from fiber because it is lightweight. Thus, you can tie a knot or anchor them to the ground to safeguard the plants from being uprooted.
What is the Average Cost of the Shrub Guard?
The average cost of shrub protectors ranges between $13.99 to $47. The amount you have to pay will depend on the type of guard you choose and the material choice, features, and size. For example, jacket-styled shrub guards will cost you more than the blanket roll guards as the former offers you more advantages.
This is an all-in-one shrub protector that will help you reduce the use of pesticides and practice organic gardening. It is made from a tear-proof material with high breathability. It will last for a longer time and maintain optimal air circulation and humidity levels. Furthermore, it comes with a zipper opening so that you can wrap this guard around shrubs with varying foliage volume without destroying the young branches and flower buds. As it is reusable, you won’t have to worry about buying one every season.
One of the major benefits of choosing this product is that you can easily plant in the spring and extend the growing season till winter. Besides, this shrub guard will protect the flowers and fruits from deer, squirrels, and others. It will also insulate the plants and shied them against the harsh winter temperature. To help you protect the plants from air and ground frost at 20°F, this guard is reinforced with a drawstring. All you have to do is pull the string and tie a knot after ensuring a snug fit.
Traps the heat inside for keeping the shrubs warm
Checking the plant’s condition is easy due to the zipper
Won’t fly away due to wind, thanks to the drawstring
With this shrub guard, you can protect multiple plants like fruit trees, ornamental plants, and garden trees from frost, pests, insects, cold, and more. Therefore, you can also cover numerous trees’ exposed stems and branches and enhance their appearance. It’s a pack of two non-woven fabric rolls, each having a length of 65 feet and a width of 4.7 inches.
In addition, the shrub guard’s fabric is thick enough to prevent damage from sun rays, reduce loss of nutrients during transplantation, and increase the moisture content for faster and healthier growth. You also won’t have to worry about the trees not getting enough fresh air as the guard’s fabric is breathable and maintains proper ventilation. On top of everything, it’s quite easy to use. You just need to attach the wrap around the bottom of the tree. Once it’s secured, rotate the roll in the upward direction till you have the desired coverage.
Can be used for almost all plants
Provides heavy insulation against the cold weather
Helps in retaining more moisture in the bark tissues
This shrub guard is best for protecting plants against any weather adversity. It is made from non-woven fabric that is thick enough to insulate the trees and shrubs and keep them warm, even if the temperature is much lower than normal. Furthermore, the plants wrapped in the guard can breathe air freely, thanks to the fabric’s breathability feature. Since each roll is 65 feet long and 4.7 inches wide, it will easily help you cover the maximum number of plants.
You can even add extra layers around the stems and bark to prevent frostbite, heavy rain, flood, hailstorm, and sunlight damage. In addition, you can use this shrub guard to safeguard landscape trees, fruit-bearing plants, ornamental garden trees, and more. Thus, there is no need to buy a separate protector for different plant types. During transplantation, you can also prevent nutrition loss by wrapping the fabric role around the plant parts.
Help in retaining moisture for healthy growth
Provides warmth for faster growth of the plant
Protects the trees and shrubs from a severe cold condition
Not appropriate for shrubs with thin bark and stems
This shrub guard comes in the form of a netted bag that can protect small to medium height plants with varying foliage volume. You can increase its overall width up to 3 feet to cover the entire plant and provide protection to the stem, branches, leaves, flower buds, fruits, and flowers. As it has multiple strands made from HDPE material, you won’t worry about air circulation and sunlight.
In addition, the shrub guarding net has small holes that will prevent cicadas from entering the protective cocoon and damage the leaves, and fruits or cause infections in the plant. It is designed so that frost, ice, or a freezing temperature can’t cause any harm to the shrubs, bushes, and trees. This protector also has a tangle-free design and can be flattened so that you can use it again in the next season.
Protects plants like berries, tomatoes, figs, cherries, and more
Don’t cause any harm to small animals while protecting plants
Can resist harmful UV radiations
Cannot be opened frequently due to the lack of a zipper
This tent-like shrub guard will help you protect the garden plants from insects, animals, and the weather. It is made from synthetic fiber which makes it stronger and more durable. Besides, it has a size of 36 inches x 36 inches x 38 inches which is why it can cover almost all the garden fruit trees and other plants.
This guard allows you to protect the plant parts from frostbite, heavy snow accumulation, and other extreme cold-water damages. To help you anchor this protector, you will get four ground spikes in the product. Hence, you won’t have to worry about the guard flying away in windy weather.
Controls light and air in the best possible manner
Can protect shrubs from heavy rain
Blends in easily with the garden or lawn settings
Has limited protection abilities
People Also Asked
Q: Can a shrub guard protect the plants from high-velocity wind?
A: Yes, a shrub guard can protect the plants from high-velocity wind, provided the product you have chosen can offer full coverage. For example, a netted cover or a zipped cover will cover the entire shrub or tree, preventing the wind from coming into contact with the plant. However, the shrub protecting rolls cannot protect trees from the wind since they only cover the thick bark or the stems.
Q: Do I need to anchor all the shrub guards to the ground?
A: No, you don’t need to anchor all shrub guards to the ground as some of them are in the form of blankets that need to be wrapped around the trees. But for other protective covers, you need to support them so they won’t fly away due to wind or storms. That’s why you have to use nails or spikes and make the guard stable.
Q: Will the shrub guard protect my ornamental garden plants from freezing?
A: Yes, a shrub protector will protect your ornamental garden plants from freezing by insulating the bark, stems, leaves, buds, and other parts of the trees and shrubs. Hence, the heat will be trapped inside, which will prevent the freezing temperature from harming the plants.
Q: Do I need to wash the shrub guard before storing it for the next season?
A: No, there is no need to wash the shrub guards before storing them for the next season because they are manufactured from plastic or other such materials that do not absorb water or get dirty easily. Hence, you can leave them under the sun for drying out, and once the material is dry, you can store them.
Q: Can I wrap the shrub guard rolls around the plants’ bark in multiple layers?
A: Yes, you can wrap multiple layers around the plants’ bark and stems, provided the temperature is extremely cold and freezing. This will help you keep them healthy and safe from frostbite, hailstorms, heavy rain, cold water, etc.
The Garden Gate Review Team’s product reviews and in-depth guides are here to help you choose the best products for a beautiful and bountiful garden and backyard. The content is created by The Garden Gate Review Team. Garden Gate’s editorial staff is not involved. Garden Gate is reader-supported: When you buy through links on our site, we may earn an affiliate commission.