How to Properly Clean Your Deck
- The first step to take when cleaning your deck is to remove everything in it. Transfer all chairs, plants, pots, grills, and other furniture in order to be able to clean the area. If you want, you can work with one side first before working on the other side of your deck.
- If you don’t want to remove everything from your deck area, especially if you are growing some vegetables, you can drape some plastic over the sensitive zones or the areas that you don’t want to catch water.
- Check if everything is in place. Before grabbing your broom to sweep the area, you should first check if all areas of your deck are properly screwed. Take a look at the flashing and ledger that connects the deck to your home. If you notice that some screws are loose, contact an expert right away.
- The next step would be to sweep your deck and get rid of all the dust that has built upon the surface of your deck. You may also want to get rid of the dust on the sides, along with the area under your deck. This is so that moisture will not build up in the area.
- After getting rid of the dust on your deck, you can then use a deck cleaner. What you have to do is to spread the cleaner on your deck, so that you can get rid of any stains that may be present. Scrub each area of your deck, and then rinse everything after.
- After rinsing, let everything dry first before putting back any of the furniture. Wood decks can be fragile when wet, so be sure to move back only the items once the deck is already dry so that it won’t cause any mold growth.
You also have the option of power washing your deck. Deck power washing is best done during the summer or in late spring. Make sure that you clean your deck on a warm sunny day so that it will dry out fast. What do to before power washing? If you are planning on power washing your deck, it is also important to take note of the following:
- Clear the area and sweep it. Make sure you still get rid of all the dust and dirt so it won’t stick to the surface of your deck.
- A low-pressure setting works best, because too much pressure may damage your deck.
- Don’t spend too much time in one area. It would be best to keep the nozzle of your power washer moving so that you won’t put any other areas at risk of becoming damaged. Use overlapping sweeping strokes and work your way in an upward direction.
- Also, make sure that you don’t put the nozzle too close to the surface of your deck, as it may damage it or cause accidents.
- Make sure that you let your deck dry up thoroughly. To make the process faster, you can get rid of standing water. Once everything has dried up, check your deck and inspect it. Make sure there aren’t screws that were undone during the cleaning process.